Bredel Peristaltic Hose Pumps
At Industrial Air Services, we help facilities select Bredel peristaltic hose pumps for demanding transfer, dosing and metering applications involving abrasive, corrosive, viscous or solids-laden materials.
Based in LaVergne, Tennessee, we support industrial facilities throughout Central and East Tennessee, including Nashville, Murfreesboro, Smyrna, Lebanon, Clarksville, Cookeville, Chattanooga and Knoxville.
Bredel pumps keep the pumped material within a reinforced hose. No valves, mechanical seals or moving pumping components contact the fluid during normal operation. This design makes hose pumps a practical option for materials that can cause clogging, seal problems or rapid wear in other pump designs.
How Bredel Hose Pumps Work
Rotating shoes compress a reinforced hose inside the pump housing, pushing fluid toward the discharge. As the hose returns to its original shape, it creates suction that draws more material into the pump.
The hose is the primary wear component. Routine maintenance focuses on hose condition, lubricant and other scheduled checks, without the conventional wet-end rebuilds associated with some pump designs.
For facilities handling difficult fluids, this operating principle can simplify maintenance while supporting dependable transfer.
Bredel Hose Pump Series
The main Bredel hose pump series is designed for demanding applications involving:
Abrasive slurries
Sludge and wastewater solids
Corrosive chemicals
High-viscosity fluids
Pastes and process mixtures
Materials containing suspended solids
Available models cover a range of flow and pressure requirements. Selection depends on the material being pumped, the required duty cycle and the installation’s suction and discharge conditions.
Industrial Air Services can help evaluate these factors for treatment facilities, processing operations and manufacturing plants across Tennessee.
APEX Hose Pumps
APEX hose pumps are designed for low- to medium-pressure dosing, metering and transfer applications.
Their flow-per-revolution design can allow lower operating speeds for a given duty, helping manage hose wear and operating costs when the pump is properly selected.
APEX pumps are an option for facilities handling abrasive slurries or aggressive chemicals that need straightforward maintenance and dependable fluid transfer.
Bredel CIP Hose Pumps
Bredel CIP pumps accommodate processes that require clean-in-place operation. Retractable shoes release compression from the hose during cleaning, opening the flow path for the cleaning cycle.
This configuration can help simplify cleaning in suitable applications. Hose materials, cleaning chemicals, temperatures and process sanitation requirements should all be reviewed during selection.
Bredel DuCoNite and Heavy Duty Pumps
Bredel DuCoNite pumps use a corrosion-resistant, paint-free electroplated housing for demanding environments.
Bredel Heavy Duty configurations offer features intended for more challenging operating conditions. The appropriate configuration depends on the process fluid, surrounding environment and maintenance requirements.
Industrial Air Services can help discuss the application details that determine which configuration is appropriate.
Why Choose Bredel Hose Pumps?
No valves or mechanical seals in the pumping fluid path
Fluid contained within a reinforced hose
Ability to handle abrasive and viscous materials
Options for corrosive fluids and suspended solids
Self-priming operation
Dry-running capability within manufacturer operating limits
Reversible flow
Repeatable dosing and metering
Straightforward hose replacement
No seal-flush water requirement
Bredel Hose Pump Applications
Bredel pumps can be considered for applications where fluid characteristics make conventional pumping difficult, including:
Sludge transfer at wastewater facilities
Abrasive slurry movement
Chemical dosing and transfer
Thickened process fluids
Solids-bearing waste streams
Viscous product transfer
Proper sizing requires more than a target flow rate. Solids size, abrasiveness, viscosity, temperature, suction conditions and operating hours all affect pump and hose selection.
Hose Pump Support Across Central and East Tennessee
Industrial Air Services supports facilities in Davidson, Rutherford, Wilson, Sumner and Williamson counties, along with communities throughout Central and East Tennessee.
From manufacturing operations in Nashville, LaVergne and Smyrna to processing facilities in Cookeville, Chattanooga and Knoxville, our team can help review hose pump requirements.
If you are searching for “industrial hose pumps near me” or need help evaluating a Bredel pump for a difficult fluid, contact Industrial Air Services.
Contact Industrial Air Services for Bredel Hose Pumps
Talk with our team about flow, discharge pressure, solids content, viscosity, chemical compatibility and suction conditions.
Call: (615) 641-3100
Visit: 138 Bain Drive • LaVergne, TN 37086
Bredel Hose Pumps FAQ
What is a Bredel hose pump?
A Bredel hose pump is a peristaltic pump that moves fluid by compressing a reinforced hose. The pumped material stays inside the hose, separating it from the moving pumping components.
What materials can Bredel pumps handle?
Bredel pumps can handle abrasive slurries, sludge, corrosive chemicals, viscous fluids, pastes and materials containing suspended solids. The hose material and pump configuration must be suitable for the fluid, temperature and operating conditions.
Can Bredel hose pumps run dry?
Yes. Bredel hose pumps do not rely on the pumped fluid to lubricate the pumping mechanism. Dry-running capability should still be considered alongside the manufacturer’s speed, temperature and operating limits.
Are Bredel pumps self-priming?
Yes. Bredel pumps are self-priming. Actual suction performance depends on the model, pump speed, fluid viscosity, hose condition, piping arrangement and installation elevation.
What is the difference between Bredel and APEX hose pumps?
The main Bredel series serves demanding duties and includes models with higher flow and pressure capabilities. APEX pumps focus on low- to medium-pressure dosing, metering and transfer applications. The best fit depends on the required duty and operating costs.
What is a Bredel CIP pump?
A Bredel CIP pump has retractable shoes that release hose compression during clean-in-place cycles. This allows cleaning fluid to pass through the open hose. Suitability depends on the process and its cleaning requirements.
What is a Bredel DuCoNite pump?
Bredel DuCoNite is a hose pump configuration with a corrosion-resistant, paint-free electroplated housing. It is intended for environments where corrosion and coating durability are concerns.
Are Bredel hose pumps suitable for accurate metering?
Bredel pumps provide repeatable displacement that can support dosing and metering applications. Actual accuracy depends on pump selection, speed control, hose condition, fluid properties and system conditions.
How often should a Bredel hose be replaced?
Hose life varies with speed, discharge pressure, abrasiveness, chemical compatibility, temperature and operating hours. Follow the manufacturer’s maintenance instructions and use inspection findings and service history to plan replacement.
Why is my Bredel hose failing early?
Common causes include chemical incompatibility, excessive pressure or speed, poor suction conditions, incorrect lubricant, improper installation and operation outside recommended limits. Reviewing the complete application helps identify recurring problems.
Why is my Bredel pump losing flow?
Reduced flow may result from hose wear, a suction restriction, incorrect speed, excessive discharge pressure or changes in viscosity. Drive problems and installation conditions can also affect output.
Can Bredel pumps handle abrasive slurries?
Yes. Abrasive slurry handling is a common application for Bredel hose pumps. Because the slurry remains inside the hose, it does not contact impellers or mechanical seals. Abrasiveness still affects hose life and should be considered during sizing.
Can Industrial Air Services help with a Bredel pump problem?
Contact Industrial Air Services to discuss reduced flow, recurring hose failures, replacement requirements or other operating concerns. Providing the pump model, fluid details, speed, pressure and maintenance history will help our team evaluate the next steps.
Where can I find Bredel hose pump assistance in Tennessee?
Call Industrial Air Services at (615) 641-3100 or visit 138 Bain Drive • LaVergne, TN 37086. We support facilities across Central and East Tennessee, including Nashville, Murfreesboro, Lebanon, Clarksville, Cookeville, Chattanooga and Knoxville.