TIGERFLOW Packaged Pump Systems

TIGERFLOW supplies integrated pumping packages combining pumps, controls, piping, and related components. These systems support water pressure, circulation, and other building or industrial pumping duties.

Applications include pressure boosting, HVAC circulation, and engineered water-handling systems. Select the package for the actual service, demand range, available utilities, and operating requirements.

A booster system adds pressure to an incoming water supply. Its selection depends on available inlet pressure, required outlet pressure, peak flow, and the distribution system.

A controller adjusts pump speed using a pressure signal and setpoint. The design must account for sensor location, changing demand, and minimum operating limits.

Multiple pumps can stage capacity as demand changes and provide planned redundancy. The number and size of pumps should reflect peak duty, minimum demand, and service-continuity requirements.

The lead pump starts first, and additional pumps operate as demand requires. Alternation can distribute operating hours, depending on the controls and the intended duty strategy.

Factory assembly can reduce field fabrication and coordination. Site connections, electrical work, controls integration, startup, and verification still depend on the supplied package and project scope.

Provide peak and minimum flow, inlet-pressure range, required discharge pressure, elevation, and piping losses. Include operating schedules and any need for backup capacity.

Available inlet pressure affects the boost required and suction conditions. A package selected from an average supply pressure may underperform during periods when the inlet pressure drops.

Appropriate pumping packages can serve heating or cooling circuits. Specify fluid composition, flow, differential pressure, temperature, and the control strategy for the connected equipment.

Integration may be available depending on the controller and specified communications. Confirm required signals, protocol, alarms, and control responsibility before ordering the package.

TIGERFLOW offers engineered packages for project requirements. Provide layout constraints, materials, redundancy goals, controls interfaces, and required documentation so the proposed scope is clearly defined.

Confirm access, footprint, service clearances, floor loading, electrical supply, piping connections, and drainage. Ensure equipment can be maintained or removed without obstructing essential building operations.

Plan pump, motor, valve, sensor, and control inspections according to component manuals. Verify pressure readings, staging behavior, alarms, and any installed tank's condition.

A replacement requires review of current demand, inlet conditions, pipe sizes, available space, and electrical capacity. Recheck the duty rather than duplicating an oversized or outdated package.

Contact Industrial Air Services at (615) 641-3100 with flow, pressure, utilities, layout information, and operating requirements to discuss a suitable packaged pumping system.